SANHENG Center Air Conditioning Motorized Valve

SANHENG Center Air Conditioning Motorized Valve 

General

SH07series motorized ball valve mainly used in center air conditioning cool or hot water system and heating system, according

to actual demand to control the flow precision, avoid temperature sharp variation, achieved real and accurate controlling room

temperature.

Valve is drive by bidirectional motor. The motor connects thermostat through common, open, close. The thermostat receive

data constantly and deal with them, which send a signal to valve, it open and the water flow into FCU, supply cold or hot air to

room till the temperature to set point, then the thermostat send signal to valve again to shut the power, result in the valve in

good position and the temperature keep in set point.

Features

1)  Straight-through, high flow, no block, Kvs is more than general product.

2)  Totally enclosed structure have good waterproof and dustproof function.

3) ​ The temperature of valve body and environment without conduct in actuator

4) ​ Actuator dismounting and installation easily, after pipe and equipment finished.

​5)  Valve can be mounted closed wall benefit from eccentricity structure.

​6)  High close off pressure differential, valve open flexible, avoid water hammer.

​7)  Actuator can be installed 2 directions easy to wire and maintenance.

​8)  The power of motor shut automatic against in position, to guarantee long operating life.

Technology Data

Connector: thread

Medium: cold or hot water or 60% glycol

Valve pressure: 2.0Mpa

Max differential pressure: 1.0Mpa

Voltage: AC220V or AC24V or DC5V or DC12V or DC24V

Wire connect: 3 wires dual control or 3 wires single control.

Power:5W (during run)

Torque: 2Nm or 4Nm or 8Nm or 12Nm(optional)

   v Pay by T/T, LC

v Customers can choose which payment ways that you accept, paypal is most useful and safe, please don’t refusepaypal fee when you choose it.

v Loading Port: ShangHai or NingBo, China

v Samples are available within 7-10 working days.  

v Mass Production Delivery: 20 -50days after sample confirmation

Ningbo Sanheng Refrigeration Control Co.,Ltd is an refrigeration parts manufacturer from China,which specializes in manufacturing HVAC&Refrigeration parts.

Our aim is to supply the most suitable refrigeration unit parts for refrigeration unit manufacturers and distributors.